April 24th, 2012 by admin

You can jailbreak iPhone 4SiPhone 4, iPhone 3GS, iPod Touch 3G/4G, iPad 1 and iPad 2 by using the latest version of RedSn0w 0.9.10b8. The latest version is the improved one and provides extra feature of backing up your activation tickets. Also it provides Corona jailbreak for iPhone 4S and iPad 2 if these are running 5.0.1. The new version of RedSn0w can be used to re-install the jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone 3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom.

RedSn0w 0.9.10b8 jailbreak is:

  • tethered for iPhone 4S and iPad 2 on iOS 5.0.1, if these devices are running 5.1 then it can not be jailbroken.
  • tethered for all other devices if they are running ios 5.1 except iPhone 3gs with old bootrom
  • untethered for all devices (except iphone 4S and iPad 2)  if they are running ios 5.0.1 or older versions

How to jailbreak iPhone 4S, iPhone 4/3gs, iPod Touch and iPad 1/2

Step 1: Download latest version of RedSn0w 0.9.10b8 Windows Mac . Now extract the zip file on your desktop or other folder as you wish.

Step 2: Double click the RedSn0w.exe file to run or right click and Run as Administrator.

Step 3: There are two options Jailbreak and Extras. Click Jailbreak (Jailbreak and Install Cydia).

Step 4: You will see the below screen. There are two sections first about iPhone 4S and iPad 2, so if you have iPhone 4S and iPad 2 you can just go to next step without turning your device off. For all other devices you have to plug your device to your computer and turn it off. You can see the status of your iPhone at the bottom of this screen. Read this whole screen carefully before pressing Next. If you are not following the instructions the Next button will remain disabled.

Note: Before clicking next make sure your computer is connected to the internet.

Step 5: Refer to below image now you have to put your device in DFU (direct firmware  update) mode, by following the screen instructions. If you are unsuccessful and there is an error message (your iphone turns on), just relax and keep the computer screen as it is. Press and Hold both power and Home buttons until your iphone turns off and turns ON, Now release power button and keep holding Home button untill you will see some progress activity on computer (RedSn0w) screen.

You will see progress on your computer program and will reach to a selection screen as mentioned in next step.

Step 6: By default install Cydia is selected just press Next. You will see different messages on RedSn0w screen with progress bars. Finally a screen saying “The rest of this process takes place on your device”. Now you will see the RedSn0w icon on your device with progress bar and then black screen with white text lines moving up. It may take some time but your device will reboot and become normal. Now it is jailbroken, but wait ! Read the last step carefully.

Step 7: Now your device is jailbroken untethered or tethered, so it is time to boot tethered if it is tethered jailbroken. How you know it is tethered or untethered. Very simple just run Cydia or Safari if it runs normally you are lucky you got the untethered jailbreak and if these two programs just run and stop it means you need next step.

Step 8: Boot Tethered

Run the RedSn0w program and from the main screen select the second option “Extras” Then Select “Just Boot“. Now you have complete the steps 4 and 5 to put your device in DFU mode. Once the device goes in DFU mode remaining process will complete itself and your device will reboot. Now you have tethered jailbreak installed. Open Cydia and start using jailbreak apps.

Posted in How to, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , , , , , , , , , , , , , ,

March 9th, 2012 by admin

Below is the step wise guide on how to jailbreak ios 5.1 semitethered.  Please note that this jailbreak for ios 5.1. is not compatible with iPhone 4S, ipad 2 and the new ipad that was released yesterday. If you want to jailbreak ios 5 on iphone 4S and iPad2/3 it is recommended that you keep on existing iOS 5.0.1 and refrain from updating to ios 5.1. You can jailbreak 5.0.1 using Absinthe for iPhone 4S and iPad 2. The jailbreak which you will get by following procedure is semi-tethered which means you have to apply the last steps every time you need to restart your device. Similarly if you need to unlock or you already have unlocked your device it is better to not update to ios 5.1.

For Absinthe Jailbreak Click Here to go to Absinthe section.

Other iOS 5.1 / iOS 5.0.1 Tutorials:

Following are the steps on How To Jailbreak 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by clicking below links:

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click Jailbreak to jailbreak and install Cydia

Step 4: Follow the instructions given on Next screen and put your iPhone/iPod Touch in DFU mode. Press Next.

Step 5: Follow the screen instructions to put your device in DFU mode. RedSn0w will detect iPhone and start installation of jailbreak and select “Install Cydia” when asked. (If this process does not start you can follow steps to put your device in DFU mode as instructed by clicking Next in previous step again). Close RedSn0w.

Step 6: Boot Tethered your iphone or iPod touch 4g: Restart RedSn0w by double clicking the RedSn0w.exe file.

Go to Extra option and click “Just Boot”

Your iDevice will restart and now it is jailbroken tethered.

Note: This is a tethered jailbreak and if you need to reboot your iphone you need to do step 6 each time therefore you need computer to reboot your iPod touch 4g.

If this ios 5.1 jailbreak is not working for you, you can try Sn0wbreeze ios 5.1 jailbreak software by visiting How to jailbreak ios 5.1 using SnowBreeze

Posted in Cydia, How to, iOS, ios 5.1.0, Jailbreak, Untethered 5.0.1 Tagged with: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

January 16th, 2012 by admin

Recently a new version of Corona 5.0.1 untether was released by Saurik as mentioned on his twitter, latest version is not for A5 devices since many are waiting for that but on ly suppoert the previous devices i.e. iPhone 4, iPhone3GS, iPod Touch 4G/3G and iPad 1, only difference is that the new update fixes iBooks along with the launchd framework.

But it can be useful for you if you were facing unexpected errors in your jailbreak and were unable to jailbreak your device I suggest to try with new version.

You can download RedSnow 0.9.10b4 from below links.

Download RedSnow 0.9.10b4 For Windows

Download RedSnow 0.9.10b4 For Mac

Posted in iOS, Jailbreak, RedSn0w Tagged with: , , , , ,

December 25th, 2011 by admin

While pod2G is working hard to bring untethered iOS jailbreak for 5.1.0, RedSn0w 0.9.9b9b can be downloaded which can jailbreak iOS 5.0.1 and includes support for APTickets. This latest version of RedSn0w is tethered jailbreak like previous one.

According to official iPhone Dev Team blog RedSn0w 0.9.9b9 update adds the following:

  1. Native support for 5.0.1 which means no need to point redsn0w at 5.0 IPSW or use command-line args. Support is automatically extended to all of redsn0w’s various functions: “Jailbreak”, “Just boot”, “Fetch blobs”, “Stitch blobs”, “Recovery Fix”
  2. iBooks fixed in 5.0 and 5.0.1. This is a targeted fix that doesn’t remove entire sandbox mechanism. 5.x users already using redsn0w “Just Boot” can just use the new version without redoing entire jailbreak again
  3. 3GS old-bootrom owners can now create custom IPSWs without blobs
  4. ultrasn0w compatability update (i.e. same baseband requirements) for 5.0.1 will be available on Cydia Monday
  5. support for newer 8GB iPhone4 (which until now had problems with “Fetch blobs”). Thanks to @JKjeepnJeff for loaning us one of these newer i4 units for testing!
  6. allows Windows users (not just OS X users) to use the “Custom” button to create IPSWs without baseband updates. (Update: please wait for 0.9.9b9b for this!)
  7. accommodates APTickets in 5.x (until next Apple countermove). APTickets are crypto-verified before submitting to Cydia, just like the main blobs. Cydia server support for sending back the APTickets is upcoming. For now, use stitched IPSWs for 5.x. Due to APTickets, stitched 5.x IPSWs now require user to start in “Pwned DFU” mode
  8. Support added for stitching 4.x blobs to iPad2-GSM IPSWs. Similar to @notcom’s TinyCFW but doesn’t require lots of RAM or a TSS-assisted restore. Won’t work for iPad2 5.x blobs (or iPhone4S at all) until a bootrom-level exploit is out
  9. top line now shows whether (and where) a redsn0w update is available, or if the version being run is the latest. Uses DNS TXT record to alleviate any concerns about snooping
  10. no 5.1 beta support at this time (major apps like Cydia are not yet compatible)
  11. @pod2g has been doing a great job porting his 5.x untether…check his blog for updates!
  12. Owners of newer 3GS iPhones must not flash the iPad baseband. The iPad baseband will not work on 3GS iPhones built later than 2011 week 35. You have a week 35 or later device if your serial # starts with xx135.

Update #17b: Version 0.9.9b9b enables the “Custom” button for Windows users, and make the 3GS week 35 warning a more explicit part of the process.

Update #17c: For those Windows users encountering launch errors due to the self-update check, please use this version instead for now:

Download Links are given below:

Redsn0w 0.9.9b9b for Windows

Redsn0w 0.9.9b9b for Mac

Posted in Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , , , ,