April 24th, 2012 by admin

You can jailbreak iPhone 4SiPhone 4, iPhone 3GS, iPod Touch 3G/4G, iPad 1 and iPad 2 by using the latest version of RedSn0w 0.9.10b8. The latest version is the improved one and provides extra feature of backing up your activation tickets. Also it provides Corona jailbreak for iPhone 4S and iPad 2 if these are running 5.0.1. The new version of RedSn0w can be used to re-install the jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone 3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom.

RedSn0w 0.9.10b8 jailbreak is:

  • tethered for iPhone 4S and iPad 2 on iOS 5.0.1, if these devices are running 5.1 then it can not be jailbroken.
  • tethered for all other devices if they are running ios 5.1 except iPhone 3gs with old bootrom
  • untethered for all devices (except iphone 4S and iPad 2)  if they are running ios 5.0.1 or older versions

How to jailbreak iPhone 4S, iPhone 4/3gs, iPod Touch and iPad 1/2

Step 1: Download latest version of RedSn0w 0.9.10b8 Windows Mac . Now extract the zip file on your desktop or other folder as you wish.

Step 2: Double click the RedSn0w.exe file to run or right click and Run as Administrator.

Step 3: There are two options Jailbreak and Extras. Click Jailbreak (Jailbreak and Install Cydia).

Step 4: You will see the below screen. There are two sections first about iPhone 4S and iPad 2, so if you have iPhone 4S and iPad 2 you can just go to next step without turning your device off. For all other devices you have to plug your device to your computer and turn it off. You can see the status of your iPhone at the bottom of this screen. Read this whole screen carefully before pressing Next. If you are not following the instructions the Next button will remain disabled.

Note: Before clicking next make sure your computer is connected to the internet.

Step 5: Refer to below image now you have to put your device in DFU (direct firmware  update) mode, by following the screen instructions. If you are unsuccessful and there is an error message (your iphone turns on), just relax and keep the computer screen as it is. Press and Hold both power and Home buttons until your iphone turns off and turns ON, Now release power button and keep holding Home button untill you will see some progress activity on computer (RedSn0w) screen.

You will see progress on your computer program and will reach to a selection screen as mentioned in next step.

Step 6: By default install Cydia is selected just press Next. You will see different messages on RedSn0w screen with progress bars. Finally a screen saying “The rest of this process takes place on your device”. Now you will see the RedSn0w icon on your device with progress bar and then black screen with white text lines moving up. It may take some time but your device will reboot and become normal. Now it is jailbroken, but wait ! Read the last step carefully.

Step 7: Now your device is jailbroken untethered or tethered, so it is time to boot tethered if it is tethered jailbroken. How you know it is tethered or untethered. Very simple just run Cydia or Safari if it runs normally you are lucky you got the untethered jailbreak and if these two programs just run and stop it means you need next step.

Step 8: Boot Tethered

Run the RedSn0w program and from the main screen select the second option “Extras” Then Select “Just Boot“. Now you have complete the steps 4 and 5 to put your device in DFU mode. Once the device goes in DFU mode remaining process will complete itself and your device will reboot. Now you have tethered jailbreak installed. Open Cydia and start using jailbreak apps.

Posted in How to, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , , , , , , , , , , , , , ,

April 2nd, 2012 by admin

If you have upgraded your iPad 1 to new iOS 5.1 you already have lost your previous jailbreak and all jailbreak apps, if it was jailbroken. Or if you want to upgrade to 5.1 version and use the jailbreak apps you can follow below step-wise jailbreak guide.

Remember this is a tethered ios 5.1 jailbreak and we are still waiting for untethered 5.1 jailbreak which I hope will be available with in few weeks as stated by pod2g.  Tethered jailbreak means, whenever you need to restart/reboot your iPad you will need a computer to boot it using the RedSn0w 0.9.10b6.

Below is the guide on How to jailbreak iPad 1 iOS 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking below links:

RedSn0w 0.9.10b6 For Windows

RedSn0w 0.9.10b6 For Mac

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click the first button Jailbreak to jailbreak and install Cydia


Step 4: Connect your iPad 1 into the computer using the USB port. Read instructions on below screen and make sure that your iPad is OFF before clicking the Next button.

You can see on the screen that this jailbreak is also compatible for iPhone 4S and iPad 2 but remember if these are having iOS 5.0.1 and if having iOS 5.1 then it is not compatible.

Step 5: Now you have to put your device in DFU (direct firmware update) mode, just follow the RedSn0w screen instructions and you will do it, if you feel difficulty you can visit this post on How to put your iPad in DFU mode.

  • Hold down both the Home button and the Power button for 10 seconds.
  • Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 6: Just observer the screen message and let it complete until next input screen comes.

Your iPad will now reboot to identify the build.

Now RedSn0w will prepare the jailbreak data.

 

Step 7: On next screen check Install Cydia from the list of check box options and click Next.

 

Step 8: iPad will now reboot and RedSn0w will build the jailbreak process and upload ramdisk. The remaining part of jailbreak will take place on your iPad and you can see the RedSn0w icon on the screen with progress bar. After completion of this jailbreak install the iPad will reboot and will have Cydia installed. Now you have to boot it using RedSn0w before you can use the Cydia and Safari.

 

 

Step 9: Boot Tethered iPAd1 : Again start the RedSn0w and Select Extras this time.


 

Step 10: Select Just boot from the Extras menu to just boot tethered right now. The iPad 1 will reboot and now it is tethered jailbroken. You can run Cydia now. Just tap the Cydia icon on your springboard and if it loads it means your jailbreak is successful. If Cydia is not running try reinstalling again from step 1.

Posted in How to, ios 5.1.0, iPad 2, iPhone4S, jailbrake, Jailbreak, RedSn0w, Tips & Tricks Tagged with: , , , , , , , , , , , , , , , , , , , ,

March 9th, 2012 by admin

Below is the step wise guide on how to jailbreak ios 5.1 semitethered.  Please note that this jailbreak for ios 5.1. is not compatible with iPhone 4S, ipad 2 and the new ipad that was released yesterday. If you want to jailbreak ios 5 on iphone 4S and iPad2/3 it is recommended that you keep on existing iOS 5.0.1 and refrain from updating to ios 5.1. You can jailbreak 5.0.1 using Absinthe for iPhone 4S and iPad 2. The jailbreak which you will get by following procedure is semi-tethered which means you have to apply the last steps every time you need to restart your device. Similarly if you need to unlock or you already have unlocked your device it is better to not update to ios 5.1.

For Absinthe Jailbreak Click Here to go to Absinthe section.

Other iOS 5.1 / iOS 5.0.1 Tutorials:

Following are the steps on How To Jailbreak 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by clicking below links:

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click Jailbreak to jailbreak and install Cydia

Step 4: Follow the instructions given on Next screen and put your iPhone/iPod Touch in DFU mode. Press Next.

Step 5: Follow the screen instructions to put your device in DFU mode. RedSn0w will detect iPhone and start installation of jailbreak and select “Install Cydia” when asked. (If this process does not start you can follow steps to put your device in DFU mode as instructed by clicking Next in previous step again). Close RedSn0w.

Step 6: Boot Tethered your iphone or iPod touch 4g: Restart RedSn0w by double clicking the RedSn0w.exe file.

Go to Extra option and click “Just Boot”

Your iDevice will restart and now it is jailbroken tethered.

Note: This is a tethered jailbreak and if you need to reboot your iphone you need to do step 6 each time therefore you need computer to reboot your iPod touch 4g.

If this ios 5.1 jailbreak is not working for you, you can try Sn0wbreeze ios 5.1 jailbreak software by visiting How to jailbreak ios 5.1 using SnowBreeze

Posted in Cydia, How to, iOS, ios 5.1.0, Jailbreak, Untethered 5.0.1 Tagged with: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

December 27th, 2011 by admin

Welcome to JailbreakStation’s iOS 5.0.1 / 5.0 /5.1  jailbreaking guides. Our guides are free and easy to follow.

You can use below guides for jailbreaking your iPhone4S, iPhone4, iPhone 3gs, iPod Touch 3, iPod Touch 4, iPad1 and iPad2 for all versions of iOS including iOS 5.1 jailbreak. The latest jailbreak for iOS 5.1 is RedSn0w 0.9.10b6 which is tethered that means you need to use computer to reboot your device whenever is required. Also this iOS 5.1 jailbreak is not compatible with 5.1 on iPhone 4S and iPad 2 therefore I suggest to use Absinthe ios 5.0.1 jailbreak for iPad 2 and iPhone 4S users and don’t update to iOS 5.1 until untethered ios 5.1 jailbreak is released.


The next tutorial is for iPhone4s and iPad 2 jailbreak using Absinth released by greenp0ison.

Jailbreak iPhone 4, iPad 1 and iPod Touch: Please Update To iOS 5.0.1 and use the guide below for a fully functional ios untethered jailbreak.

If you want to preserve your baseband unlock your iPhone using Pwnage tool follow below guide, if your carrier is working you can follow above jailbreak guide.

Above jailbreak works with iPhone4, iPhone 3G, iPod Touch 4G, iPod Touch 3G and iPad.

List of Complete Jailbreak Tutorials

Jailbreak iPhone 4S
Jailbreak iOS 5.0: Absinthe (Untethered)
Jailbreak iOS 5.0.1: Absinthe (Untethered)

Jailbreak iOS 5.0.1: RedSn0w (Tethered)

Jailbreak iPad 2 
Jailbreak iOS 5.0.1: Absinthe (Untethered)

Jailbreak iOS 5.0.1: RedSn0w (Tethered)

Jailbreak iPhone 4

Jailbreak iOS 5.1.0: RedSn0w (Tethered)
Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPod Touch 4G

Jailbreak iOS 5.1.0: RedSn0w (Tethered)

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPod Touch 3G

Jailbreak iOS 5.1.0: RedSn0w (Tethered)

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPhone 3GS

Jailbreak iOS 5.1.0: RedSn0w (Tethered)

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPad 1G

Jailbreak iOS 5.1 : RedSn0w (Tethered)

Jailbreak iOS 5.0.1: RedSn0w (Untethered) (Recommended)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Our guides are 100% free and does not require any registration or subscription therefore feel free to share with your friends.

What is jailbreaking?

Jail breaking is a process of removing the restrictions imposed by Apple on their iDevices. You will use redsnow 0.9.10b3 for jailbreaking your iPhone 4, iPhone3g,  iPod Touch and iPad, that installs a program Cydia on your device. So you can customize your device for apps, tweaks, cheats, unlocking etc. This jailbreak is untethered it means you can use your device normally even if restarted which was not in the case of tethered jail break.

Posted in How to, iOS, Jailbreak, RedSn0w, Untethered 5.0.1 Tagged with: , , , , , , , , , , , , , , , , , , , , , , , ,