Category: RedSn0w

April 24th, 2012 by Muz Khan

You can jailbreak iPhone 4SiPhone 4, iPhone 3GS, iPod Touch 3G/4G, iPad 1 and iPad 2 by using the latest version of RedSn0w 0.9.10b8. The latest version is the improved one and provides extra feature of backing up your activation tickets. Also it provides Corona jailbreak for iPhone 4S and iPad 2 if these are running 5.0.1. The new version of RedSn0w can be used to re-install the jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone 3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom.

RedSn0w 0.9.10b8 jailbreak is:

  • tethered for iPhone 4S and iPad 2 on iOS 5.0.1, if these devices are running 5.1 then it can not be jailbroken.
  • tethered for all other devices if they are running ios 5.1 except iPhone 3gs with old bootrom
  • untethered for all devices (except iphone 4S and iPad 2)  if they are running ios 5.0.1 or older versions

How to jailbreak iPhone 4S, iPhone 4/3gs, iPod Touch and iPad 1/2

Step 1: Download latest version of RedSn0w 0.9.10b8 Windows Mac . Now extract the zip file on your desktop or other folder as you wish.

Step 2: Double click the RedSn0w.exe file to run or right click and Run as Administrator.

Step 3: There are two options Jailbreak and Extras. Click Jailbreak (Jailbreak and Install Cydia).

Step 4: You will see the below screen. There are two sections first about iPhone 4S and iPad 2, so if you have iPhone 4S and iPad 2 you can just go to next step without turning your device off. For all other devices you have to plug your device to your computer and turn it off. You can see the status of your iPhone at the bottom of this screen. Read this whole screen carefully before pressing Next. If you are not following the instructions the Next button will remain disabled.

Note: Before clicking next make sure your computer is connected to the internet.

Step 5: Refer to below image now you have to put your device in DFU (direct firmware  update) mode, by following the screen instructions. If you are unsuccessful and there is an error message (your iphone turns on), just relax and keep the computer screen as it is. Press and Hold both power and Home buttons until your iphone turns off and turns ON, Now release power button and keep holding Home button untill you will see some progress activity on computer (RedSn0w) screen.

You will see progress on your computer program and will reach to a selection screen as mentioned in next step.

Step 6: By default install Cydia is selected just press Next. You will see different messages on RedSn0w screen with progress bars. Finally a screen saying “The rest of this process takes place on your device”. Now you will see the RedSn0w icon on your device with progress bar and then black screen with white text lines moving up. It may take some time but your device will reboot and become normal. Now it is jailbroken, but wait ! Read the last step carefully.

Step 7: Now your device is jailbroken untethered or tethered, so it is time to boot tethered if it is tethered jailbroken. How you know it is tethered or untethered. Very simple just run Cydia or Safari if it runs normally you are lucky you got the untethered jailbreak and if these two programs just run and stop it means you need next step.

Step 8: Boot Tethered

Run the RedSn0w program and from the main screen select the second option “Extras” Then Select “Just Boot“. Now you have complete the steps 4 and 5 to put your device in DFU mode. Once the device goes in DFU mode remaining process will complete itself and your device will reboot. Now you have tethered jailbreak installed. Open Cydia and start using jailbreak apps.

Posted in How to, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , , , , , , , , , , , , , ,

April 17th, 2012 by Muz Khan

You can jailbreak iPhone 4S ios 5.0.1, iPhone 4, 4GS, iPad and iPod Touch using the newly released RedSn0w 0.9.10b6, iPhone Dev Team has released Redsn0w 0.9.10 b6 for Windows and Mac, the update adds nothing to the old version except fixing of an issue for users running Mac OS X 10.5.x or earlier.

This redsn0w jailbreak is also tethered and if you are looking for iPhone 4S 5.1 jailbreak you must be disappointed that it is still not available you can jailbreak iPhone 4S only if it is running iOS 5.0.1.

Follow this jailbreak guide for performing tethered or untethered jailbreak using RedSn0w 0.9.10b6.

Below is the list of jailbreaks which you can perform with RedSn0w 0.9.10b6:

  • iPhone 4S on 5.0.1 Tethered
  • iphone 4S 5.1  jailbreak – Not Applicable
  • iPhone 4 jailbreak 5.1 Tethered
  • iPhone 4 jailbreak 5.0.1 UnTethered
  • iPhone 3GS 5.1 jailbreak – Tethered for New bootrom
  • iPhone 3GS 5.1 jailbreak -Untethered for old bootroom
  • iPad 1 5.1 jailbreak tethered

Below are the download links for Redsn0w:

Download redsn0w 0.9.10b6b for OS X
Download redsn0w 0.9.10b6 for Windows

Posted in ios 5.1.0, iPad 2, iPhone4S, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , ,

April 2nd, 2012 by Muz Khan

If you have upgraded your iPad 1 to new iOS 5.1 you already have lost your previous jailbreak and all jailbreak apps, if it was jailbroken. Or if you want to upgrade to 5.1 version and use the jailbreak apps you can follow below step-wise jailbreak guide.

Remember this is a tethered ios 5.1 jailbreak and we are still waiting for untethered 5.1 jailbreak which I hope will be available with in few weeks as stated by pod2g.  Tethered jailbreak means, whenever you need to restart/reboot your iPad you will need a computer to boot it using the RedSn0w 0.9.10b6.

Below is the guide on How to jailbreak iPad 1 iOS 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking below links:

RedSn0w 0.9.10b6 For Windows

RedSn0w 0.9.10b6 For Mac

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click the first button Jailbreak to jailbreak and install Cydia


Step 4: Connect your iPad 1 into the computer using the USB port. Read instructions on below screen and make sure that your iPad is OFF before clicking the Next button.

You can see on the screen that this jailbreak is also compatible for iPhone 4S and iPad 2 but remember if these are having iOS 5.0.1 and if having iOS 5.1 then it is not compatible.

Step 5: Now you have to put your device in DFU (direct firmware update) mode, just follow the RedSn0w screen instructions and you will do it, if you feel difficulty you can visit this post on How to put your iPad in DFU mode.

  • Hold down both the Home button and the Power button for 10 seconds.
  • Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 6: Just observer the screen message and let it complete until next input screen comes.

Your iPad will now reboot to identify the build.

Now RedSn0w will prepare the jailbreak data.

 

Step 7: On next screen check Install Cydia from the list of check box options and click Next.

 

Step 8: iPad will now reboot and RedSn0w will build the jailbreak process and upload ramdisk. The remaining part of jailbreak will take place on your iPad and you can see the RedSn0w icon on the screen with progress bar. After completion of this jailbreak install the iPad will reboot and will have Cydia installed. Now you have to boot it using RedSn0w before you can use the Cydia and Safari.

 

 

Step 9: Boot Tethered iPAd1 : Again start the RedSn0w and Select Extras this time.


 

Step 10: Select Just boot from the Extras menu to just boot tethered right now. The iPad 1 will reboot and now it is tethered jailbroken. You can run Cydia now. Just tap the Cydia icon on your springboard and if it loads it means your jailbreak is successful. If Cydia is not running try reinstalling again from step 1.

Posted in How to, ios 5.1.0, iPad 2, iPhone4S, jailbrake, Jailbreak, RedSn0w, Tips & Tricks Tagged with: , , , , , , , , , , , , , , , , , , , ,

March 14th, 2012 by Muz Khan

If your ipod touch 4g is having untethered jailbreak on iOS 5.0.1 or older versions and after release of new iOS 5.1 you want to update to ios 5.1 and then jailbreak again iPod touch 4g, please note that the new ios 5.1 has been jailbroken tethered already and Pod2g is working hard to get the iOS 5.1 jailbreak untethered ipod touch 4g very soon (subscribe to my blog below for update).

For the time being you can jailbreak iPod Touch 4g ios 5.1 tethered using RedSn0w 0.9.10b6 by just following the tutorial below.

If you are having older versions of iOS you can visit our complete list of tutorials for jailbreaking all devices including iPod Touch jailbreak.

The 5.1 jailbreak tutorial is very simple to jailbreak iPod touch 4g on ios 5.1.0. The below steps are also compatible with iPhone 4/3gs, ipod touch 3g and ipad 1 on iOS 5.1 by using the latest version of RedSn0w 0.9.10b6.

Important: You have to note that this is tethered jailbreak that means every time you need to restart your iPod Touch 4 you have to follow the last step of “Just Boot”.

Below are the steps on How to jailbreak iPod Touch 4g.

If your ipod is not running on iOS 5.1 you can update to iOS 5.1 by visiting Apple website or through iTunes or directly from your device.

Important Note: This jailbreak is not for iPhone 4S jailbreak, iPad 2 or iPad 3 jailbreak if these are running ios 5.1 otherwise if they are running ios 5.0.1 then this 5.1 jailbreak will work well. 

Step 1: Download latest version of RedSn0w 0.9.10b6 by clicking below links:

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click Jailbreak to jailbreak and install Cydia

Step 4: Follow the instructions given on Next screen and put your iPod Touch in DFU mode. Press Next.

Step 5: Follow the screen instructions to put your device in DFU mode. RedSn0w will detect iPod Touch and start installation of jailbreak and select “Install Cydia” when asked. (If not you can follow steps to put your device in DFU mode as instructed by clicking Next in previous step again). Close RedSn0w.

Step 6: Boot Tethered your iPod touch 4g: Restart RedSn0w by double clicking the RedSn0w.exe file.

Go to Extra option and click “Just Boot”

Your ipod will restart and now it is jailbroken tethered.

Note: This is a tethered jailbreak and if you need to reboot your iPod Touch you need to do step 6 each time therefore you need computer to reboot your iPod touch 4g.

Subscribe to my blog so that I can update you whenever the untethered jailbreak for iPod Touch 4g is released or available.

Posted in How to, iOS, ios 5.1.0, iPod Touch, Jailbreak, Jailbreak Downloads, RedSn0w, Untethered 5.0.1 Tagged with: , , , , , , , , , , , ,

February 16th, 2012 by Muz Khan

Download redsn0w 0.9.10b5 free latest jailbreak version that has been released recently which is Redsn0w 0.9.10b5 untethered . If you were having some unexpected error doing jailbreak previously you can try this updated redsn0w 0.9.10b5. Remember you can jailbreak ios 5.0.1 untethered using redsnow on following devices.

  • iPhone 4
  • iPhone 4 (CDMA)
  • iPhone 3GS
  • iPad 1
  • iPod Touch 4G
  • iPod Touch 3G

Free Download links for redsn0w are as under:

Download RedSn0w 0.9.10b5 for Mac

Download RedSn0w 0.9.10b5 for Windows
After downloading redsn0w you can follow my previous guide on “How to jailbreak using RedSn0w

If you want to jailbreak iPhone 4S or iPad 2 you can jailbreak using Absinthe. Click here to find ” How to jailbreak iphone 4s and ipad 2 using Absinthe

Posted in jailbrake, Jailbreak, RedSn0w, Untethered 5.0.1 Tagged with: , , , , ,

February 5th, 2012 by Muz Khan

Jailbreaking made easy, jailbreak ios 5 with below mentioned free tutorials and jailbreak download links. Compatible with iphone 4s, iphone 4, iphone 3gs, ipod touch 3g, ipod touch 4g, ipad 1 and ipad 2. Before jailbreaking download jailbreak software from the links on right side of this page or from below links. Depending on your device you will need the jailbreak ios 5 software as under:

iPhone 4S and iPad 2 > Download Absinthe Jailbreak the latest version so far is Absinthe 0.4

iPhone 4, 3gs, ipod touch 3g/4g and ipad 1 > Download RedSn0w Jailbreak the latest version so far is redsn0w 0.9.10b5

After downloading the jailbreak software you can directly go to the respective tutorial as given in the below list of free jailbreak ios 5 guides.

 

Jailbreak iPhone 4S
Jailbreak iOS 5.0: Absinthe (Untethered)
Jailbreak iOS 5.0.1: Absinthe(Untethered)

Jailbreak iPad 2 
Jailbreak iOS 5.0.1: Absinthe (Untethered)

Jailbreak iPhone 4
Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPod Touch 4G

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPod Touch 3G

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPhone 3GS

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Jailbreak iPad 1G

Jailbreak iOS 5.0.1: RedSn0w (Untethered)
Jailbreak iOS 5.0.1: Sn0wBreeze (Untethered)
Jailbreak iOS 5.0.1: PwnageTool (Untethered)
Jailbreak iOS 5.0: RedSn0w (Untethered)
Jailbreak iOS 4.3.5: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: RedSn0w (Tethered)
Jailbreak iOS 4.3.4: PwnageTool (Untethered)
Jailbreak iOS 4.3.3: JailbreakMe (Untethered)

Posted in Absinthe, How to, ios 5.1.0, iPod Touch, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w, Untethered 5.0.1 Tagged with: , , , , , , , , , , , , , , ,

January 30th, 2012 by Muz Khan

Below are the direct download links for latest new redsn0w jailbreak. The latest version of redsn0w jailbreak has been released recently by iPhone Dev Team. The new redsn0w version is  Redsn0w 0.9.10b5 and it resolves problems with images displaying in iBooks with DRM. This new version can be used for making a new jailbreak or fix the problems with iBooks on already jailbroken iPhone 3gs, iphone4, ipod touch 3/4 or ipad.

If you want to jailbreak first time you can follow How To Jailbreak Guide and use the below links to download the new redsn0w version.

If you have already jailbroken device you only do the jailbreak again by using the latest version of redsn0w (remember to uncheck the option “Install Cydia” to avoid any unexpected error. Similarly you can go to Cydia and install Corona for applying this update.

Download RedSn0w 0.9.10b5 For Windows

Download RedSn0w 0.9.10b5 For Mac

Posted in jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w, Tips & Tricks Tagged with: , , , ,

January 16th, 2012 by Muz Khan

Recently a new version of Corona 5.0.1 untether was released by Saurik as mentioned on his twitter, latest version is not for A5 devices since many are waiting for that but on ly suppoert the previous devices i.e. iPhone 4, iPhone3GS, iPod Touch 4G/3G and iPad 1, only difference is that the new update fixes iBooks along with the launchd framework.

But it can be useful for you if you were facing unexpected errors in your jailbreak and were unable to jailbreak your device I suggest to try with new version.

You can download RedSnow 0.9.10b4 from below links.

Download RedSnow 0.9.10b4 For Windows

Download RedSnow 0.9.10b4 For Mac

Posted in iOS, Jailbreak, RedSn0w Tagged with: , , , , ,

January 9th, 2012 by Muz Khan

Welcome to JailbreakStation’s iOS 5 / 5.0.1 jailbreaking guides. Our guides are free for ever and no need to pay for unlocking and jailbreak.

Jailbreak iOS 5 /5.0.1 Untethered for iPhone 4 GSM/CDMA, iPhone 3GS, iPad1, iPod Touch 4G/3G as mentioned below. If you are already having tethered jailbreak 5 just go to Cydia and search and install Corona 5.0.1. If you want a new jailbreak  for ios 5 follow below 3 easy steps.

Jailbreak ios 5 is done using newly released RedSn0w 0.9.10b3, and it supports following devices running iOS 5.0.1:

  • iPhone 4
  • iPhone 4 (CDMA)
  • iPhone 3GS
  • iPad 1
  • iPod Touch 4G
  • iPod Touch 3G

Before proceeding to the jailbreak process please note the following important points: This jailbreak is not for iPad 2 and iPhone 4S.

 

Steps to jailbreak iOS 5.0.1 over iPhone, iPad and iPod Touch

1. Check the version of your device go to settings —> General —-> About and version it should be 5.0.1 if it is not update your device with iOS 5.0.1.

Click here to download ios 5.0.1.

2. Download RedSn0w 0.9.10b5 on your computer(Check right side bar for updated latest RedSn0w version)

RedSn0w 0.9.10b5 Download For Windows

RedSn0w 0.9.10b5 Download for Mac

3. Unzip/extract the RedSn0w downloaded file and open the folder (see below screen). Double click RedSn0w.exe executable file:

4. RedSn0w will run and you will see following screen on your computer.

5. Now Click  “Jailbreak and Install Cydia”


6. Now connect your iDevice with the computer and turn it off by pushing power button and sliding to power off. you need to put your device in DFU mode, before pressing the Next button on next screen make sure your device is turned off and plugged into your computer.

7. Now you have to do the following steps as shown on screen shot. Do whenever these are highlighted while processing.

  • Hold Down the Power button for 1 second.
  • Without releasing the power button press and hold the Home button (bottom center) for 10 seconds.
  • Without releasing the Home button release the power button but keep holding the Home button for 15 seconds.
Important: At this step most of the people are confused and unable to put the device in DFU mode. You may see the following screen. Also your device may be showing Apple icon flashing or device is restarted. Don’t panic just click Back button and again Next. Don’t follow onscreen sequence do as under:
  • Press and hold both Power and Home buttons and count 1-10 normally (even if device is On).
  • Release Power button and keep Home button pressed until you see any activty on computer screen. Repeat same if no activity observed.
Redsn0w will process itself to complete the jailbreak process if there is no error.

8. Now you will see next screen to install Cydia select the first option “Install Cydia” and click Next. You can select other options also if you need.

9. After the RedSn0w installation is completed you will get a done message. Congratulations Your device is now jailbroken.

If this tutorial works for you please give comments and share with your friends. Subscribe to our updates for keeping yourself updated on jailbreaking and Apple updates.

If you face errors write in comments i shall answer and get back again.

What is jailbreaking?

Jailbreaking is a process of removing the restrictions Apple has forced on iDevices (iPhone, iPod Touch, and iPad) gain root access. Mostly jailbreaking  is done by installing an application RedSn0w that installs Cydia which acts same as app store in Apple. Users can customize their apps, tweeks, themes, and things not possible in the Apple App Store.

Posted in Jailbreak, Jailbreak Downloads, Pwnage Tool, RedSn0w, Untethered 5.0.1 Tagged with: , , , , , , , , , ,

January 7th, 2012 by Muz Khan

You can jail break untethered your iPhone 4 GSM/CDMA running ios 5.0.1 using these three simple steps. You have to first ensure that your iOS is upgraded to 5.0.1 if you don’t know go to Settings —-> General —-> Info and check version. If it is not updated upgrade using iTunes.

You can jailbreak iPod Touch 4G/3G and iPad 1 also using this tutorial.

If you are looking for jailbreak of iPhone4s and iPad2, please subscribe to our website so that we can update you as soon as new jailbreak is available.
Steps to jailbreak iPhone4 untethered using RedSn0w 0.9.10b3. (Please read complete before starting jail break).If your iPhone4 is already jailbroken tethered you need to go to Cydia —-> Search —-> Type Corona 5.0.1 Untether and install it your device will become tethered.

 

1. Download RedSn0w 0.9.10b3 by clicking below links. Extract the zip file to your desktop.

Download RedSn0w 0.9.10b3 For Windows

Download RedSn0w 0.9.10b3 For Mac

 

2. open the downloaded and extracted folder and double click the RedSn0w.exe file as shown below:

3. Click Jailbreak and Install Cydia on next screen.

4. Now connect your device to computer and turn it OFF click Next.

5. Follow the screen instructions as shown on next screen (see below image). Your device will go in DFU mode automatically.

6. On next screen you will be given option of “Install Cydia” keep it checked and press next. Remaining process will happen on your iPhone4 and it will restart jailbroken.  (If it freezes/stucks on black screen with white text on it don’t worry, press both power and Home buttons for few seconds until your iPhone restarts. Hope this will be OK and jail break is done).

Posted in How to, iOS, Jailbreak, Jailbreak Downloads, RedSn0w, Tips & Tricks, Untethered 5.0.1