Below is a complete list of iOS 8.3 jailbreak errors and one by one solutions as well in order to achieve a fully working 8.3 jailbreak without further TaiG errors.
The latest errors which TaiG users are facing are iTunes 64 bit driver error that shows that ” Apple Driver hasn’t been found” and
error -1101 in which the progress is stuck at 20% while jailbreaking iOS 8.3 and program gives message of Restarting Jailbreak, please. Below is the remedy to solve the problem of Apple driver.
We have given a complete step wise guide for this problem although this will be fixed in revised version of TaiG i.e TaiG 2.1.0 at any moment because the TaiG team is continuously working to fix this problem.
If you are facing the problem of stuck at 60% progress we recommend to use the latest version of TaiG tool from our download page for jailbreak tools, currently you can use v2.4.1 beta 1.
Apple driver hasn’t been found.
Please download and install iTunes.
Reason: 64 Bits iTunes driver Version not found.
- Download Latest Version of iTunes from This iTunes Download Link
- Download 64bit iTunes driver iTunesDriver64_0205.exe for Windows from this page and also install it on your computer.
- Rejailbreak using latest version og TaiG 2.1.2.
-1101 Restarting device, please.
Reason: A bug in the software.
Remedy: Remove current iTunes version and install iTunes 12.0.1. Visit this tutorial to Remove Error -1101 (This error is fixed in new TaiG 2.1.2 version)
-1001 device disconnected
Reason: Device was disconnected during jailbreak process or you are using duplicate or non original cable.
Remedy: Use Genuine Cable & don’t touch your device during iOS 8.3 TaiG jailbreak process.
-1002 device with passcode on
Reason: Passcode is not turned Off
Remedy: Go to Settings => Passcode & Turn it off
-1003 program data corrupted
Reason: The TaiG downloaded file is corrupted.
- Download again the latest version of TaiG Jailbreak.
- Make sure your internet connection is good at the time of jailbreaking.
-1004 Three conditions of jailbreak failure
-1103 program data corrupted
Reason: Problem with computer.
- Use another computer to jailbreak.
- If jailbreak is stuck at 30% or 40%, end unnecessary programs using task manager (ctr+alt+Del) and retry the jailbreak.
- Reboot your device.
- Reboot your computer.
- Try another USB Cable
Reason: May be caused by antivirus software
Remedy: Turn off the antivirus program.
-1005 设备 打开了 查找我的iphone功能
-1005 Find My iPhone turned on
Reason: Find My iPhone is turned on
Remedy: Turn off Find My iPhone by going to Settings => iCloud => Find My iPhone
-1006 jailbroken device
Reason: Your iDevice has been jailbroken already.
-1007 device not activated
Reason: Device is still not activated
Remedy: Activate your device and jailbreak again.
Posted in ERRORS, jailbrake, Jailbreak, TaiG Jailbreak Tagged with: 20% error TaiG, 60% Progress TaiG Error, iTunes 12.0.1 Install, TaiG Error 1101, TaiG jailbreak Stuck at 60%, TaiG Tutorials
Earlier today it was revealed that an updated version of TaiG 2.1 is available but it can not be installed simply because it is in a build form which can be installed by using iFile to enjoy full features of iOS 8.3 Jailbreak. But later TaiG team has announced a statement warning users not to install the build and to wait until an official version is released.
Below statement from TaiG team reflects how much hard work teams are doing to release the final version of TaiG 8.3 for iOS 8.3.
Fellow users, circulating on the Internet today, is a new installation package of TaiG, TaiG beta package or false package, not the official version, TaiG currently only officially released the official version V2.0.0 jailbreak tool. Please be patient, we will be releasing a new version as soon as possible and inform you on Twitter for the first time. Sorry to have kept you waiting for so long.
Suggest that you do not download the beta package spread out, because there are application icon missing bug, the official version will be fixed. We are working with Saurik (Cydia Author) to solve UI cache problems, once resolved the new version can be released.
Saurik did not sleep well yesterday, today guys, not slept. He had stayed up all night with us, and it’s now six o’clock there. And TaiG colleagues have already stayed up for three days, for all users. The new version is basically done! Stay tuned
Based upon the latest developments we also recommend our visitors to not try this TaiG 2.1 tool to jailbreak iOS 8.3 until official version of TaiG 2.1 is released.
We shall keep you updated as soon as final version of TaiG is released officially.
Posted in jailbrake, Jailbreak, TaiG Jailbreak Tagged with: iOS 8.3 jailbreak tool, Jailbreak iOS 8.3, TaiG 8.3 Update
Now you can jailbreak iOS 8.3 using our easy to follow 8.3 jailbreak tutorial which is a big hit of the day and millions of people are already seeking to jailbreak their idevices running iOS 8.3. Actually it was not expected because iOS 9 release is expected very soon.
Now that people are jailbreaking iOS 8.3 most of them are facing the problem where the jailbreak process is stuck at 20% progress and stating “Restarting device, please…”
Don’t worry we have solution for TaiG Jailbreak Errors specially for 20% freeze problem, the solution is to install and use iTunes version 12.0.1 it is a tricky step if you are having new version. So we have given a short steps wise tutorial on how to uninstall iTunes and then reinstall iTunes 12.0.1 below.
How To UnInstall iTunes
In order to completely remove the existing iTunes we suggest to visit this tutorial by Apple and return back to this page to continue.
How To Install iTunes 12.0.1
Now after removing the iTunes reboot your computer.
Download and install iTunes 12.0.1 from iTunes 12.0.1 Download Page.
After successful installation of iTunes now jailbreakiOS 8.3 using out tutorial on How To Jailbreak iOS 8.3 using TaiG.
We believe now you will never face the TaiG error message.
Now Cydia is also upgraded by Saurik and you can enjoy full benefit of jailbreaking tweaks and themes etc.
Posted in Cydia, jailbrake, Jailbreak, Jailbreak Downloads, Jailbreak iPhone, Jailbreak News Tagged with: 20% Progress Error, 8.3 jailbreak, 8.3 untethered jailbreak, Downgrade iTunes, download 8.3 jailbreak, Download iTUnes 12.0.1, how to jailbreak 8.3, How to remove error Taig, Install iTunes 12.0.1, jailbreak 8.3, jailbreak for ios 8.3, TaiG 8.3 download, TaiG Error 1101, TaiG ios 8.3 jailbreak
Update: Taig can jailbreak up to iOS 8.2 beta versions. Although Apple has already released the 8.2 version for which we are waiting for the updated news from Taig or Pangu team. On the other hand if we talk about Pangu tool to jailbreak 8.3 or 8.2 still there is no hope and nothing new has come after the availability of jailbreak tool for 8.1 from Pangu team.
Download Taig Jailbreak For iOS 8.2 Beta 2
Download Taig Jailbreak For iOS 8.0 and 8.1.2
Download PanGu Jailbreak For iOS 8.0 & 8.1
Immediately after the release of iOS 8.1.3 by Apple today on 28-January-2015, it was revealed that Apple has already patched the exploits that were used by TaiG jailbreak tool for 8.1.2 and now iOS 8.1.3 jailbreak is not available.
If you are a jailbreaker we recommend you to keep away from the upgradation to 8.1.3, otherwise if you are willing to try and download 8.1.3 you can check our pages for downloading iOS for iPhone, iPad or iPod Touch.
This could be a situation in which most of users have fallen especially when they have already upgraded to 8.1.3 using the OTA option. If you are looking for a tool to jailbreak 8.1.3 we recommend you to immediately downgrade from 8.1.3 to iOS 8.1.2 because Apple will stop signing the existing jailbreakable version after which you must be in desparate situation until the release of jailbreak for iOS 8.1.3.
Currently the working jailbreaks for iOS 8 are TaiG and Pangu and current versions are not compatible to jailbreak iOS 8.1.3. But we believe that the way teams has jailbroken previous version they will be able to jailbreak 8.1.3 as well and we expect a quick response after the stable release of iOS 8.1.3.
We on this page shall keep you updated about the next development related to the availability of jailbreak tool for iOS 8.1.3 or any other later versions.
Posted in jailbrake, Jailbreak, Jailbreak News Tagged with: how to jailbreak 8.1.3, iOS 8.1.3 Jailbreak, iOS 8.3 jailbreak tool, jailbreak 8.1.3, jailbreak 8.2, jailbreak 8.3, jailbreak ios 8.1.3, pangu ios 8.1.3 jailbreak, taig 8.1.3 jailbreak
Now Mac users can also use their computers to jailbreak iOS 8.1.2 on their devices. PP jailbreak tool is the latest release which can be used to jailbreak your iPhone 6 Plus, 6, 5s, 5c, 5, 4s on iOS 8.0 up to iOS 8.1.2 Jailbreak for Mac.
Here are the steps on how to jailbreak 8.1.2 On Mac
Download PP Jailbreak For Mac
Please make sure that you have backed up your device before you try to jailbreak ios 8.1.2 using the Mac computer because this is important for the situation in which your device stops responding after jailbreak 8.1.2. Although it is not common but you should be careful and understand that jailbreaking may impact the data and apps if errors are faced,
Now double click the dmg file to mount it. Tap Settings from your Springboard then select Touch ID & Passcode. Turn Passcode Off if it is enabled.
Go to Settings => iCloud => Find My iPhone and ensure that Find My iPhone switch is the Off.
Now launch the PP Jailbreak program and connect your iPhone to your computer.
You will see the device is detected by the software with its model and version of iOS. Now uncheck the checkbox at the bottom left of the PP window then click the large button in the middle of window to begin your iOS 8.1.2 jailbreak.
Once you see below screen click the large button to right to confirm you’ve disabled Find My iPhone and Touch ID.
Now you will see the progress status of jailbreak process. Wait until you see below screen with green checkbox. Now your device is jailbroken and Cydia can be used now.
Once the jailbreak for iOS 8.1.2 has completed successfully, you will be shown a green checkmark on the pp tool screen, your iPhone will reboot and a Cydia app will appear on your Springboard. Congratulations, you’re now jailbroken!
Posted in How to, jailbrake, Jailbreak, Jailbreak Downloads, Mac Tagged with: jailbreak 8.1.2, pp jailbreak download
TaiG is the latest jailbreak for iOS 8.1.1, iOS 8.1.2 and iOS 8.2 beta including 8.0 and other later versions, which has been released by TaiG team. TaiG jailbreak tool is actually released by renowned jailbreak team and is now at the level where normal level of people like you can download and jailbreak their device. TaiG is already updated with all bug fixes and now users can jailbreak iOS 8.0 to 8.1.2 Untethered using the latest version from below download links.
Compatibility with other devices: Yes you can also use below tutorial to jailbreak iOS for other devices like iPad Air 2, Air, 4, 3, 2, Mini and iPod Touch 5G.
Download TaiG Jailbreak Tool for iPhone 6 Plus, 6, 5s, 5c, 5, 4s
The TaiG jailbreak is available for Windows users and can be downloaded TaiG v1.0 from below link:
TaiG 1.2.0 (English) (Windows): TaiGJBreak_EN_1201.zip [Mirror 1]
TaiG 1.2.0 (Chinese) (Windows): TaiGJBreak_1201.zip [Mirror 1]
How To TaiG Jailbreak iOS 8.1.2 Untethered Using TaiG
We recommend you to take a backup of your iPhone before proceeding with TaiG Jailbreak although the jailbreaking steps are very simple.
Step 1: Disable the passcode by going to Settings => Touch ID & Passcode and tap turning passcode off.
Step 2: Download TaiG latest version from above given taig download links or check our dedicated page for TaiG Download.
Step 3: Unzip the file and Run the TaiGJBreak_EN_1201.exe file. If your device is not connected or is not compatible to jailbreak with TaiG you will see below screen.
Step 4: Connect your device and on the TaiG Screen you will see the status of your device and if it is jailbreakable with TaiG Jailbreak or not. If Find My iPhone is on turn it off by going to Settings => iCloud => Find My iPhone , Enter your AppleID & Password and Turn Off this settings. Refer to Below Image.
After turning off the find my iPhone click Recheck to let the process continue. If everything is OK you will see below screen, you will see your iPhone model and iOS version and another reminder that turn off Find My iPhone function.
Keep both check boxes checked as per the default settings on the TaiG Jailbreak Window.
Step 5: Finally click the Jailbreak button on the screen and let the process complete. At this stage you will see the progress of iOS 8.1.1 taig jailbreak in percentage as shown below.
Taig 8.1.2 Jailbreak Process will take few minutes and meanwhile when TaiG screen is showing 60% progress iPhone will reboot. If at this stage your Passcode lock is active program will ask to disable that, after you finish the settings wait for a minute and reboot will be completed again. If you are lucky you will receive a message on Taig screen that iOS 8.1.2 TaiG jailbreak is completed, after which you will be able to see Cydia icon on your springboard.
TaiG Jailbreak Fail Errors
If you receive the TaiG jailbreak fail error (-1004) don’t worry just try again and if still problem persists you may try again by restoring your iPhone via iTunes.
How To Handle Taig Jailbreak Errors
Suggestions after several failed attempts for TaiG Jailbreak
- Please switch to the airplane mode, try again.
- Please reboot both your iOS devices as well as your computer, and try again.
- Please use the restore functionality in Pangu to restore your device, and try again.
If your jailbroken iPhone device reboots and you don’t see TaiG Jailbreak Fail Error your jailbreak is complete. Just run Cydia and wait for initial file loading, after some time now you can install Cydia Apps and Tweaks as you wish.
Below is the list of TaiG Jailbreak Errors
-1001 device is disconnected
This TaiG error occurs if the link between the iPhone under TaiG jailbreak process and computer is disconnected, which can be caused by loose connection of lightning cable on any side. Try to reconnect the device. This problem may occur due to use of non genuine accessories i.e. cables. We recommend using genuine Apple parts data lines, some times data lines appear disconnected to prevent piracy problems.
-1002 Device passcode lock is on
If you saw this code, it means you have not disabled your passcode lock Please turn off passcode via:. Settings – Passcode – Turn Passcode Off.
-1003 Program data damaged
Please Re-download Taig Jailbreak Tool from official website , or change to stable Network Environment.
-1004 Jailbreak fail
This problem is caused by your computer. Please change to another computer and try again.
-1005 You have not disabled Find my iPhone
Please disable it via: Seetings – iCloud – Find My iPhone
-1006 Device Jailbreaked
Your device is already having TaiG Jailbreak, please do not try it again or restore your iPhone.
-1007 Device not activated
Please activate your device before starting TaiG Jailbreak.
Posted in jailbrake, Jailbreak, Jailbreak Downloads, Jailbreak iPhone, TaiG Jailbreak Tagged with: jailbreak 8.1.2, jailbreak iOS 8.0, jailbreak iOS 8.1.2, jailbreak iPhone, TaiG Jailbreak, TaiG Jailbreak iOS 8
As reported yesterday with reference to the pod2g’s tweet that he is running 5.1 untethered jailbreak on iPhone 4, there came the question whether the new jailbreak will be applicable for all devices or not. Even some people commented that 5.1 iPhone 4S tethered is enough and no need for untethered.
Pod2g has beautifully replied to these people by saying “Don’t forget there are Apple TV3, 4S, iPad2 and iPad3 users out there! and lot of these users got 5.1 out of the box” So this statement clearly reveals to us that the jailbreak for 5.1 which pod2g is going to release hopefully soon, will surely be compatible for all idevices currently available in the market.
The new 5.1 untethered jailbreak will be compatible with:
- iPhone 4S 5.1
- iPhone 4 5.1
- iPhone 3Gs 5.1
- iPad 3 5.1
- iPad 2 5.1
- iPad 1 5.1
- ipod Touch 3G 5.1
- iPod Touch 4G 5.1
If you are willing to jailbreak 5.1 iPhone 4S now you can follow this tutorial but remember this is a tethered jailbreak for iphone 4S.
Read below tweets and guess yourself.
You can follow pod2g Here for latest tweets and updates on ios 5.1 jailbreak.
Don’t forget to join my blog below so that the updated news can be directly send to your mailbox on daily basis.
Posted in jailbrake, Jailbreak, Jailbreak News Tagged with: 5.1 ipad 3 jailbreak, ipad 3 5.1 jailbreak untethered, ipod touch 5.1 untethered, jailbreak 5.1 iPhone 4S, jailbreak 5.1 untethered, jailbreak iphone 4s 5.1, untethered 5.1 jailbreak iPhone 4S
Good news for everybody waiting for untethered 5.1 jailbreak. Pod2g has successfully achieved the 5.1 untethered jailbreak on iPhone 4. Earlier on 1st May 2012, pod2g announced that he has achieved the important exploits which will lead to untethered jailbreak for iOS 5.1. The poll he launched was also demanding that he should release 5.1 untethered as soon as possible.
Now after the latest tweet from pod2g everybody (at least me) must be anxious to get the public version of ios 5.1 untethered jailbreak software as soon as possible. Although the previous claims of untethered 5.1 jailbreak were not released for public use but this time I believe that pod2g will fulfill his promise as always and the latest 5.1 jailbreak which is untethered will be released for public. I believe pod2g will be making the public version so that the same can be released.
The latest tweet from pod2g is very clear and shows the confidence level of him since the iPhone 4 is running with 5.1 untethered jailbreak. I believe and hope that new 5.1 jailbreak will also compatible with iPhone 4S 5.1 untethered jailbreak and iPad 3 5.1 untethered jailbreak . Lets wait and see the actual stuff.
Posted in jailbrake, Jailbreak, Jailbreak News, Untethered 5.0.1 Tagged with: 5.1 jailbreak, 5.1 jailbreak untethered, 5.1 untethered jailbreak, ios 5.1 jailbreak, ios 5.1 untethered jailbreak, iOS 6, iOS 6 Jailbreak, iphone 4 5.1 untethered jailbreak, iphone 4s jailbreak 5.1, jailbreak 4s 5.1, jailbreak 5.1, jailbreak 5.1 untethered iphone 4s, Jailbreak 5.1 Untethered Running On iPhone 4 - By Pod2g, jailbreak ios 5.1, jailbreak ios 5.1 untethered, jailbreak iOS 6.0, jailbreak iphone 4 5.1 untethered, jailbreak iphone 4s 5.1, jailbreak iphone 4s 5.1 untethered, jailbreakme 5.1, untethered 5.1 jailbreak, Vulnerabilities Found By Pod2g
You can jailbreak iPhone 4S, iPhone 4, iPhone 3GS, iPod Touch 3G/4G, iPad 1 and iPad 2 by using the latest version of RedSn0w 0.9.10b8. The latest version is the improved one and provides extra feature of backing up your activation tickets. Also it provides Corona jailbreak for iPhone 4S and iPad 2 if these are running 5.0.1. The new version of RedSn0w can be used to re-install the jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone 3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom.
RedSn0w 0.9.10b8 jailbreak is:
- tethered for iPhone 4S and iPad 2 on iOS 5.0.1, if these devices are running 5.1 then it can not be jailbroken.
- tethered for all other devices if they are running ios 5.1 except iPhone 3gs with old bootrom
- untethered for all devices (except iphone 4S and iPad 2) if they are running ios 5.0.1 or older versions
How to jailbreak iPhone 4S, iPhone 4/3gs, iPod Touch and iPad 1/2
Step 1: Download latest version of RedSn0w 0.9.10b8 Windows Mac . Now extract the zip file on your desktop or other folder as you wish.
Step 2: Double click the RedSn0w.exe file to run or right click and Run as Administrator.
Step 3: There are two options Jailbreak and Extras. Click Jailbreak (Jailbreak and Install Cydia).
Step 4: You will see the below screen. There are two sections first about iPhone 4S and iPad 2, so if you have iPhone 4S and iPad 2 you can just go to next step without turning your device off. For all other devices you have to plug your device to your computer and turn it off. You can see the status of your iPhone at the bottom of this screen. Read this whole screen carefully before pressing Next. If you are not following the instructions the Next button will remain disabled.
Note: Before clicking next make sure your computer is connected to the internet.
Step 5: Refer to below image now you have to put your device in DFU (direct firmware update) mode, by following the screen instructions. If you are unsuccessful and there is an error message (your iphone turns on), just relax and keep the computer screen as it is. Press and Hold both power and Home buttons until your iphone turns off and turns ON, Now release power button and keep holding Home button untill you will see some progress activity on computer (RedSn0w) screen.
You will see progress on your computer program and will reach to a selection screen as mentioned in next step.
Step 6: By default install Cydia is selected just press Next. You will see different messages on RedSn0w screen with progress bars. Finally a screen saying “The rest of this process takes place on your device”. Now you will see the RedSn0w icon on your device with progress bar and then black screen with white text lines moving up. It may take some time but your device will reboot and become normal. Now it is jailbroken, but wait ! Read the last step carefully.
Step 7: Now your device is jailbroken untethered or tethered, so it is time to boot tethered if it is tethered jailbroken. How you know it is tethered or untethered. Very simple just run Cydia or Safari if it runs normally you are lucky you got the untethered jailbreak and if these two programs just run and stop it means you need next step.
Step 8: Boot Tethered
Run the RedSn0w program and from the main screen select the second option “Extras” Then Select “Just Boot“. Now you have complete the steps 4 and 5 to put your device in DFU mode. Once the device goes in DFU mode remaining process will complete itself and your device will reboot. Now you have tethered jailbreak installed. Open Cydia and start using jailbreak apps.
Posted in How to, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: 5.0.1, 5.1 jailbreak, how to jailbreak 5.1, ipad jailbreak 3g, iphone 4s, iphone 4s jailbreak 5.1, ipod touch jailbreak, jailbreak 5.1 untethered, jailbreak ipod touch, Jailbreak iTouch, jailbreak me, jailbreak me 5.1, jailbreak me 5.1.1, jailbreakme 5.1, jailbreakme 5.1.1, JailbreakMe iPhone 4S, RedSn0w, RedSn0w 0.9.10b8 jailbreak, redsnow
Thanks God the news about 5.1 jailbreak have been started after a long wait. Two days earlier pod2g tweeted that he has found an exploit for jailbreak, then chpwn tweeted that still it can take months, but now yesterday pod2g tweeted and announced that he has overcome the ASLR barrier that was preventing him from finalizing the iOS 5.1 jailbreak. You may not be aware of ASLR (Address Space Layout Randomization) which is a security measure introduced by Apple in recent versions of iOS, in order to make jailbreaking of IOS difficult. The target of jailbreakers for ASLR was to find a way to bypass the ASLR. Which pod2g has done now.
Based upon the above news I am sure that our beloved jailbreakers are very close to jailbreak 5.1 , although still they need to work on ETA. I think we should keep visiting their blogs and if possible make donations so that they can continue their 5.1 jailbreak process to make us happy.
Guys keep visiting my blog so that you are always updated on current status of ios 5.1 jailbreak and subscribe below to my blog so that you can receive emails automatically.
Posted in ios 5.1.0, iPhone4S, jailbrake, Jailbreak, Jailbreak News Tagged with: 5.1 jailbreak5.1 Jailbreak Exploit Found, ios 5.1 jailbreak, jailbreak 5, jailbreak 5.0.1, jailbreak 5.1, jailbreak 5.1 untethered, jailbreak ios 5, jailbreak ios 5.1, jailbreak ios 5.1 untethered, jailbreaknation, new 5.1 jailbreak, new ios 5.1 jailbreak