Category: iPhone4S

June 4th, 2015 by Amir Ali

Sometimes mistakes are made when in the process of configuring your email address on your iPhone, or maybe you are just trying to have fun with someone else like trying to pull a prank on them.
Whatever reason one may have, you might want to change the name which is displayed as a sender when you are sending emails. This post will tell you how to change email display name on your iPhone, Mac, and iCloud.

How to Change email Display name on your iPhone or iPad:

Following are the settings to change email display name on iPhone or iPad:

  1. Go to settings, open mail, than contact and calendars.
  2. Then click on the email account you wish to edit.
  3. Click on the email listed under the account tab.
  4. Erase the already typed in name and enter any name you like.
  5. When done, click done to apply the setting.

Change email display name

How to change email name on your Mac Mail application:

Following are the settings to change email display name on Mac:

  1. Turn you Mac on; open the app “mail” click on preferences option available under the menu bar.
  2. Look for the accounts tab and click on the email account you to wish to change
  3. If one wishes to change the display name on the iCloud account then select custom under the alias menu, (dropdown). This will let you change the name.
  4. If you wish to change the name for any other channels such Gmail or hotmail, then under the full name section, write down the new name you wish to use with that account.

How to change email name for the emails sent from iCloud:

Following are the settings to change email display name on Mac:

  1. Open iCloud.com and log in with the apple username and password.
  2. Open the mail application afterwards
  3. You will see a small gear type icon at the left bottom corner of your screen, from there choose preferences
  4. Click accounts tab
  5. Erase the name over there and type in the new name you wish for. Click done when you are finished.

Using the above methods you can change email display name on your iPhone, iPad, Mac and iCloud.

Posted in How to, iPad 3, iPhone4S Tagged with: , , , , , , ,

June 1st, 2015 by Amir Ali

Smartphone is greatly used to captures pictures and shoot many beautiful memories with its built-in camera. But some phones have poor built-in camera abilities. So here are some apps through which you can expand your camera’s capabilities. Through these apps you can improve your photography. Though they are third-party apps but they are very impressive photo apps which will allow you to be more creative with the photos you shoot. Following are the best iPhone camera apps to enhance your photo shoot experience.

iPhone Camera Apps to Shoot Wonderful Photos:

Manual ($2, iOS)

Manual is both simple and powerful app: it provides manual control over your phone’s camera. With this app, you can change the ISO, secure speed, white balance, and focus point. It can dramatically improve your photo-taking choices. The app also has recording ability of setting used for taking each picture. This is very good iPhone camera app to take the pictures with amazing effects but it is not free.

 

Snapseed (free, Android and iOS)

By using this app you can make perfect photos. It provides the power and control to your mobile device with the help of professional photo editing, tuning of images, traditional sharpening, cropping, rotating, transformation, brushing, adjustment, spot repairing, vignette ability, stacks and new styling.

 

Afterlight ($1, Android and iOS)

It is perfect image editing app with 15 adjustment tools, 59 filters, 66 textures, copying and transforming tools, frames and with Instagram tagging. With this app you will get the look you want in seconds. Its adjustment tools are designed to enhance your images to perfection. The textures created with 35mm film and instant film give natural and real light leaks

iPhone Camera Apps to Shoot Wonderful Photos:

iPhone Camera Apps

Colors ($1, iOS)

Some people like the old film camera because of collection of filters. Color tempers such people’s nostalgia a bit and provides more than 1,000 color filters. You can apply all these filters to your photos by grouping them into themes like “Rainbow” and “Romantic”. It helps in adjusting the intensity of the effects and through it you can even add variety of patterns. . Colors and Afterlight are the best iPhone camera apps and availbe only in dollar 1.

 

Lenka (Android, iOS)

Lenka is a well-known black and white camera app for professional & amateur photographers. Through it you will see what you get: formatting, AF button, manual contrast adjustment, light bulb icon, Instagram sharing and much more editing.

Manual, Snapseed, afterlight, colors and Lenka are the latest iPhone camera apps to take the amazing pictures with very new features.

Posted in Free Apps, iPhone 5, iPhone4S, TWEAKS Tagged with: , , , , ,

April 21st, 2012 by Muz Khan

Thanks God the news about 5.1 jailbreak have been started after a long wait. Two days earlier pod2g tweeted that he has found an exploit for jailbreak, then chpwn tweeted that still it can take months, but now yesterday pod2g tweeted and announced that he has overcome the ASLR barrier that was preventing him from finalizing the iOS 5.1 jailbreak. You may not be aware of ASLR (Address Space Layout Randomization) which is a security measure introduced by Apple in recent versions of iOS, in order to make jailbreaking of IOS difficult. The target of jailbreakers for ASLR was to find a way to bypass the ASLR. Which pod2g has done now.

Based upon the above news I am sure that our beloved jailbreakers are very close to jailbreak 5.1 , although still they need to work on ETA. I think we should keep visiting their blogs and if possible make donations so that they can continue their 5.1 jailbreak process to make us happy.

Guys keep visiting my blog so that you are always updated on current status of ios 5.1 jailbreak and subscribe below to my blog so that you can receive emails automatically.

Posted in ios 5.1.0, iPhone4S, jailbrake, Jailbreak, Jailbreak News Tagged with: , , , , , , , , , , ,

April 17th, 2012 by Muz Khan

If you want to jailbreak iphone 4s 5.1 the below jailbreak information is for you and you have to read very carefully before going for jailbreak 5.1 untethered or tethered, the  iPhone 4S 5.1 jailbreak has not yet been officially released by reliable sources, and the jailbreak available for the time being is tethered (some people are trying for iphone 4s also and you can try but after making backup of your device and saving SHSH blobs).

There is one website that is claiming iPhone 4S 5.1 untethered jailbreak which is xpoison, I tried to open the download links but these seem to be broken. I don’t know if someone has got xpoison 5.1 iPhone 4S jailbreak or not. You can check this video. The video title is Xpois0n RC 2.0 Untethered Jailbreak iOS 5.1 for A4, A5, A5X  Devices. Since I suspect this site therefor I am not giving direct link here but you can go to http://Xpois0n.blogspot.com.

The 5.1 jailbreak guide given below is for ios 5.1 and 5.0.1 tethered jailbreak and is compatible with  iPhone 4S, 4, 3GS, iPad 1, iPod Touch 4G, 3G using latest version of RedSn0w 0.9.10b6. I have given below the download links for redsnow 0.9.10b6 and complete step wise guide to jailbreak  iPhone 4s, untethered jailbreak iPhone 3GS 5.1, untethered  jailbreak iPod touch 4G 5.1 , jailbreak  iPod Touch 3G 5.1 and iPad 2 5.1 jailbreak.
Before continuing you have to note that:

  • This is a *tethered* 5.1 jailbreak for non-A5 devices (i.e. other than iPhone 4S, iPad 2&3) that means each time you need to reboot your idevice you will need to use redsn0w and select the option of “Just Boot” as mentioned in below jailbreak tutorial. Otherwise your Safari and Cydia apps will not work/launch.
  • Similarly If you want to use ultrasn0w for your carrier unlock, be sure to use a custom IPSW to update to 5.1 first. You have to use redsn0w for generating custome ipsw “Custom IPSW”.
  • This jailbreak will become automatically untethered if your device has old-bootrom i.e. 3GS.
  • iBooks is not working until next update of redsn0w is released

Below steps are very simple to jailbreak iPhone 4 on ios 5.0.1 and are also compatible with iPhone 3gs, ipod touch and ipad 1 on iOS 5.1 by using the latest version of RedSn0w 0.9.10b6.

Below are the steps on How to jailbreak 5.0.1 / 5.1 

Important Note: This jailbreak is not for iPhone 4S jailbreak, iPad 2 or iPad 3 jailbreak if these are running ios 5.1 otherwise if they are running ios 5.0.1 then it is OK. 

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking Here for Windows and Here for Mac.

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click Jailbreak to jailbreak and install Cydia


Step 4: Follow the instructions given on Next screen and put your device in DFU mode. Press Next.

Step 5: Follow the screen instructions to put your device in DFU mode. RedSn0w will detect iPhone 4 and start installation of jailbreak and select “Install Cydia” when asked. (If not you can follow steps to put your device in DFU mode as instructed by clicking Next in previous step again). Close RedSn0w.

Step 6: Boot Tethered your iPhone 4: Restart RedSn0w by double clicking the exe file.

Go to Extra option and click “Just Boot”

Your iphone 4 will restart and now it is jailbroken tethered.

Note: This is a tethered jailbreak and if you need to reboot your iPhone you need to do step 6 each time therefore you need computer to reboot your iPhone4.

Subscribe to my blog so that I can update you whenever the untethered jailbreak for iPhone 4 is available.

Most popular search terms for this guide:

jailbreak 5.1 untethered, Jailbreak iPhone 4s 5.1, iphone 4s 5.1 jailbreak, jailbreak ios 5.1 untethered, ios 5.1 untethered jailbreak, untethered jailbreak ios 5.1, jailbreak iphone 4s 5.1 untethered, iphone 4s jailbreak 5.1, ios 5.1 jailbreak untethered,  untethered jailbreak ios 5.1 iphone 4, iphone 4s ios 5.1 jailbreak, jailbreak iphone 4 5.1 untethered, jailbreak ios 5, jailbreak 5.1, 5.1 untethered, ios 5.1 untethered, untethered 5.1 ios

Posted in How to, iPad 2, iPhone4S, jailbrake, Jailbreak, Jailbreak Downloads Tagged with: , , , , , , , , , , , , , , , , , ,

April 17th, 2012 by Muz Khan

You can jailbreak iPhone 4S ios 5.0.1, iPhone 4, 4GS, iPad and iPod Touch using the newly released RedSn0w 0.9.10b6, iPhone Dev Team has released Redsn0w 0.9.10 b6 for Windows and Mac, the update adds nothing to the old version except fixing of an issue for users running Mac OS X 10.5.x or earlier.

This redsn0w jailbreak is also tethered and if you are looking for iPhone 4S 5.1 jailbreak you must be disappointed that it is still not available you can jailbreak iPhone 4S only if it is running iOS 5.0.1.

Follow this jailbreak guide for performing tethered or untethered jailbreak using RedSn0w 0.9.10b6.

Below is the list of jailbreaks which you can perform with RedSn0w 0.9.10b6:

  • iPhone 4S on 5.0.1 Tethered
  • iphone 4S 5.1  jailbreak – Not Applicable
  • iPhone 4 jailbreak 5.1 Tethered
  • iPhone 4 jailbreak 5.0.1 UnTethered
  • iPhone 3GS 5.1 jailbreak – Tethered for New bootrom
  • iPhone 3GS 5.1 jailbreak -Untethered for old bootroom
  • iPad 1 5.1 jailbreak tethered

Below are the download links for Redsn0w:

Download redsn0w 0.9.10b6b for OS X
Download redsn0w 0.9.10b6 for Windows

Posted in ios 5.1.0, iPad 2, iPhone4S, jailbrake, Jailbreak, Jailbreak Downloads, RedSn0w Tagged with: , , , , , ,

April 8th, 2012 by Muz Khan

Many people want to unlock their mobile phones in order to use the alternative SIM cards, usually at the end of the initial contract period or during that time. As you are aware most of the iPhone’s are “locked” to a particular network i.e. iPhone by AT&T in the US and by O2 in UK.

Most of us need to use our phones with different carriers while we are are travelling or sending our mobiles as gift to other countries, but can not use due to its locking to the native carrier. Therefore we need carrier unlock iPhone, by unlocking the iPhone you can be able to place calls with any GSM carrier by inserting different Subscriber Identity Modules (SIMs) into the phone. After iPhone is unlocked you only need to buy any local GSM-compatible SIM and put it in your iphone to make your calls hence avoiding using the iphone with roaming and paying lot for roaming charges.

I have given below the complete list of iPhone’s which are now available in the market. It is suggested to fist ensure that your iphone is unlock-able, before going for any jailbreaking or unlocking process:

You have to first jailbreak your iPhone and then you can install the unlock tool like UltraSn0w. As always instructed make a backup for your device before starting any jailbreak or unlock activity.

UNLOCK iPHONE 4S:

iPhone 4S with iOS Version 5.1 |

iPhone 4S with iOS Version 5.0.1 |

iPhone 4S with iOS Version 5.0 |

 

UNLOCK iPHONE 4:

iPhone 4 with iOS Version 5.1|

    • Modem firmware: 04.11.08 –> is not unlockable at the moment
    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.00.03 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> is not unlockable at the moment

iPhone 4 with iOS Version 5.0.1|

    • Modem firmware: 04.11.08 –> is not unlockable at the moment
    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.00.03 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.5 (Tutorial)

iPhone 4 with iOS Version 5.0

    • Modem firmware: 04.11.08 –> is not unlockable at the moment
    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.00.03 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.5 (Tutorial)

iPhone 4 with iOS Version 4.3.3 

    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.10.01 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.4 (Tutorial)

iPhone 4 with iOS Version 4.3.2 

iPhone 4 with iOS Version 4.3.1 |

iPhone 4 with iOS Version 4.3.0 |

    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.10.01 –> is not unlockable at the moment
    • Modem firmware: 02.10.04 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.4 (Tutorial)

iPhone 4 with iOS Version 4.3.0 |

    • Modem firmware: 04.10.01 –> is not unlockable at the moment
    • Modem firmware: 03.10.01 –> is not unlockable at the moment
    • Modem firmware: 02.10.04 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.4 (Tutorial)

iPhone 4 with iOS Version 4.2.1 |

    • Modem firmware: 03.10.01 –> is not unlockable at the moment
    • Modem firmware: 02.10.04 –> is not unlockable at the moment
    • Modem firmware: 01.59.00 –> Unlock with UltraSn0w 1.2.4 (Tutorial)

iPhone 4 with iOS Version 4.1.0 |

iPhone 4 with iOS Version 4.0.2 |

iPhone 4 with iOS Version 4.0.1 |

iPhone 4 with iOS Version 4.0.0 |

Posted in How to, iPhone4S, Tips & Tricks, UltraSn0w, Unlock Tagged with: , , , , , , , , , , ,

April 4th, 2012 by Muz Khan

Jailbreak 5.1 Semi Untethered On iPhone, iPod Touch & iPad (4th Gen) With Redsn0w. Below is the guide on How to jailbreak ios 5.1
This is a semi untethered 5.1 jailbreak therefore you need to boot tethered each time you restart your device. If you want to use an unlock it is highly recommend to stay on iOS 5.0.1. This jailbreak is not for iPad 2 or 3, and the iPhone 4s if these are running ios 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking below links:

RedSn0w 0.9.10b6 For Windows

RedSn0w 0.9.10b6 For Mac

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click the first button Jailbreak to jailbreak and install Cydia


Step 4: Connect your iPad 1 into the computer using the USB port. Read instructions on below screen and make sure that your iPad is OFF before clicking the Next button.

You can see on the screen that this jailbreak is also compatible for iPhone 4S and iPad 2 but remember if these are having iOS 5.0.1 and if having iOS 5.1 then it is not compatible.

Step 5: Now you have to put your device in DFU (direct firmware update) mode, just follow the RedSn0w screen instructions and you will do it, if you feel difficulty you can visit this post on How to put your iPad in DFU mode.

  • Hold down both the Home button and the Power button for 10 seconds.
  • Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 6: Just observer the screen message and let it complete until next input screen comes.

Your iPad will now reboot to identify the build.

Now RedSn0w will prepare the jailbreak data.

 

Step 7: On next screen check Install Cydia from the list of check box options and click Next.

 

Step 8: iPad will now reboot and RedSn0w will build the jailbreak process and upload ramdisk. The remaining part of jailbreak will take place on your iPad and you can see the RedSn0w icon on the screen with progress bar. After completion of this jailbreak install the iPad will reboot and will have Cydia installed. Now you have to boot it using RedSn0w before you can use the Cydia and Safari.

 

 

Step 9: Boot Tethered iPAd1 : Again start the RedSn0w and Select Extras this time.


 

Step 10: Select Just boot from the Extras menu to just boot tethered right now. The iPad 1 will reboot and now it is tethered jailbroken. You can run Cydia now. Just tap the Cydia icon on your springboard and if it loads it means your jailbreak is successful. If Cydia is not running try reinstalling again from step 1.

Most popular search terms for this post:

jailbreak 5.1, jailbreak 5.0.1, jailbreaknation, jailbreak 5.1 untethered, jailbreakme 5.0.1, jailbreak ios 5.1 untethered, 5.1 jailbreak, jailbreak iphone 4 5.1, ios 5.1 jailbreak, iphone 4 5.1 jailbreak, ios 5.1 jailbreak untethered

Posted in ios 5.1.0, iPad 2, iPad 3, iPhone4S, jailbrake, Jailbreak Tagged with: , , , , , , , , , , , , , , , , , , , , , , ,

April 2nd, 2012 by Muz Khan

Absinthe 2.0 Download Jailbreak 5.1 /5.1.1 Untethered

Welcome to JailbreakStation’s Jailbreak 5.1.1 / 5.0.1 / 5.1  tutorial and  guides. Our guides are free and easy to follow. 

Absinthe 2.0 jailbreak 5.1.1 Untethered has been released for latest iOS devices to jailbreak 5.1.1. You can use below guides for jailbreaking the new iPad3,  iPhone 4S, iPhone 4, iPhone 3GS, iPod Touch 3G, iPod Touch 4G, iPad 1 and iPad 2 for all versions of iOS including jailbreak 5.1.1. The latest available and tested jailbreak 5.1.1 is RedSn0w 0.9.11b4 and Absinthe 2.0 download to jailbreak 5.1.1 and jailbreak 5.1. The RedSn0w jailbreak 5.1.1 is tethered and also not compatible to jailbreak 5.1 and jailbreak 5.1.1 on the new iPad 3, iPhone 4S and iPad 2 therefore I suggest to use Absinthe2.0 download for iPad 3, iPad 2 and iPhone 4S users to jailbreak 5.1.1 untethered.

The latest jailbreak software are RedSn0w 0.9.11b4 and Absinthe 2.0.

Absinthe 2.0 download Jailbreak 5.1.1

Absinthe 2.0 Download

Absinthe 2.0 Download

The next tutorial is for iPhone4s and iPad 2 jailbreak using Absinth 2.0 download released by greenp0ison.

Absinthe 2.0 Download

Jailbreak iPhone 4, iPad 1 and iPod Touch: Please Update To iOS 5.0.1 and use the guide below for a fully functional ios untethered jailbreak.

Absinthe 2.0 Download

If you want to preserve your baseband unlock your iPhone using Pwnage tool follow below guide, if your carrier is working you can follow above jailbreak guide.

Absinthe 2.0 Download

Above jailbreak works with iPhone4, iPhone 3G, iPod Touch 4G, iPod Touch 3G and iPad.

List of Complete Jailbreak Tutorials

Absinthe 2.0 download, Jailbreak 5.1.1 Untethered iPhone 4s/4/3gs ipad 3/2/1 iPod Touch 3g/4g Apple TV 2

 

Jailbreak iPhone 4S: Absinthe 2.0 Download for 5.1.1,  iOS 5.0 Absinthe (Untethered) iOS 5.0.1: Absinthe (Untethered) iOS 5.0.1: RedSn0w (Tethered)

Jailbreak iPad 3: Absinthe 2.0 Download for 5.1.1iOS 5.0.1: Absinthe (Untethered) iOS 5.0.1: RedSn0w (Tethered)

Jailbreak iPad 2 iOS 5.0.1: Absinthe (Untethered) iOS 5.0.1: RedSn0w (Tethered), ios 5.1.1 Absinthe 2.0 Download

Jailbreak iPhone 4 iOS 5.0.1: RedSn0w (Untethered) Sn0wBreeze (Untethered) 5.0.1: PwnageTool (Untethered), 5.1.1 Absinthe 2.0 Download Untethered

Jailbreak iPod Touch 4G RedSn0w (Untethered) Sn0wBreeze (Untethered) PwnageTool (Untethered)

Jailbreak iPod Touch 3G 5.1 RedSn0w (Tethered) 5.0.1: RedSn0w (Untethered) Sn0wBreeze (Untethered) 5.0.1: PwnageTool (Untethered)

Jailbreak iPhone 3GS iOS 5.1.0: RedSn0w (Tethered) iOS 5.0.1: RedSn0w (Untethered) 5.0.1: Sn0wBreeze (Untethered), jailbreak 5.1.1 Absinthe 2.0 Download

Jailbreak iPad 1G :5.1 : RedSn0w (Tethered) 5.0.1 RedSn0w (Untethered)

Our guides are 100% free and does not require any registration or subscription therefore feel free to share with your friends.

Jail breaking is a process of removing the restrictions imposed by Apple on their iDevices. You can use redsnow 0.9.11b4 and Absinthe untethered jailbreak 5.1.1 for jailbreaking your iPhone, iPod Touch and iPad. Jailbreak 5.1.1 will install a program Cydia on your idevice which you can use an app store to download and purchase jailbreak 5.1.1 apps. So you can customize your device for apps, tweaks, cheats, unlocking etc. If a jailbreak is untethered it means you can use your device normally even if restarted which is not in the case of tethered jailbreak.

RedSnow 0.9.11b4 jailbreak 5.1.1 and jailbreak 5.1 is a tethered jailbreak. A tethered jailbreak is one when you need to connect your idevice to PC and use RedSn0w or any jailbreak software to reboot it and if you reboot without tethering it your jailbreak app Cydia and Safari will not work.

Absinthe 2.0 download to jailbreak 5.1.1 Untethered Tutorials and guides.

Untethered jailbreak 5.1.1 Absinthe 2.0 download

jailbreak 5.1.1 Untethered Absinthe 2.0 download

Posted in Absinthe, Corona, Cydia, How to, ios 5.1.0, iPad 2, iPad 3, iPhone 5, iPhone4S, iPod Touch, jailbrake, Jailbreak Tagged with: , , , , , , , , , , , , , ,

April 2nd, 2012 by Muz Khan

If you have upgraded your iPad 1 to new iOS 5.1 you already have lost your previous jailbreak and all jailbreak apps, if it was jailbroken. Or if you want to upgrade to 5.1 version and use the jailbreak apps you can follow below step-wise jailbreak guide.

Remember this is a tethered ios 5.1 jailbreak and we are still waiting for untethered 5.1 jailbreak which I hope will be available with in few weeks as stated by pod2g.  Tethered jailbreak means, whenever you need to restart/reboot your iPad you will need a computer to boot it using the RedSn0w 0.9.10b6.

Below is the guide on How to jailbreak iPad 1 iOS 5.1

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking below links:

RedSn0w 0.9.10b6 For Windows

RedSn0w 0.9.10b6 For Mac

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click the first button Jailbreak to jailbreak and install Cydia


Step 4: Connect your iPad 1 into the computer using the USB port. Read instructions on below screen and make sure that your iPad is OFF before clicking the Next button.

You can see on the screen that this jailbreak is also compatible for iPhone 4S and iPad 2 but remember if these are having iOS 5.0.1 and if having iOS 5.1 then it is not compatible.

Step 5: Now you have to put your device in DFU (direct firmware update) mode, just follow the RedSn0w screen instructions and you will do it, if you feel difficulty you can visit this post on How to put your iPad in DFU mode.

  • Hold down both the Home button and the Power button for 10 seconds.
  • Release the Power button and continue holding the Home button until RedSn0w detects the device.

Step 6: Just observer the screen message and let it complete until next input screen comes.

Your iPad will now reboot to identify the build.

Now RedSn0w will prepare the jailbreak data.

 

Step 7: On next screen check Install Cydia from the list of check box options and click Next.

 

Step 8: iPad will now reboot and RedSn0w will build the jailbreak process and upload ramdisk. The remaining part of jailbreak will take place on your iPad and you can see the RedSn0w icon on the screen with progress bar. After completion of this jailbreak install the iPad will reboot and will have Cydia installed. Now you have to boot it using RedSn0w before you can use the Cydia and Safari.

 

 

Step 9: Boot Tethered iPAd1 : Again start the RedSn0w and Select Extras this time.


 

Step 10: Select Just boot from the Extras menu to just boot tethered right now. The iPad 1 will reboot and now it is tethered jailbroken. You can run Cydia now. Just tap the Cydia icon on your springboard and if it loads it means your jailbreak is successful. If Cydia is not running try reinstalling again from step 1.

Posted in How to, ios 5.1.0, iPad 2, iPhone4S, jailbrake, Jailbreak, RedSn0w, Tips & Tricks Tagged with: , , , , , , , , , , , , , , , , , , , ,

April 1st, 2012 by Muz Khan

You can jailbreak ios 5.1 tethered on iPhone 4, 3GS, iPad 1, iPod Touch 4G, 3G using latest version of RedSn0w 0.9.10b6. I have given below the download links for redsnow 0.9.10b6 and complete step wise guide to jailbreak  iPhone 4, iPhone 3GS, iPod touch 4G, iPod Touch 3G and iPad 1.
Before continuing you have to note that:

  • This is a *tethered* 5.1 jailbreak for non-A5 devices (i.e. other than iPhone 4S, iPad 2&3) that means each time you need to reboot your idevice you will need to use redsn0w and select the option of “Just Boot” as mentioned in below jailbreak tutorial. Otherwise your Safari and Cydia apps will not work/launch.
  • Similarly If you want to use ultrasn0w for your carrier unlock, be sure to use a custom IPSW to update to 5.1 first. You have to use redsn0w for generating custome ipsw “Custom IPSW”.
  • This jailbreak is will become automatically untethered if your device has old-bootrom 3GS.
  • iBooks is not working until next update of redsn0w is released

Below steps are very simple to jailbreak iPhone 4 on ios 5.0.1 and are also compatible with iPhone 3gs, ipod touch and ipad 1 on iOS 5.1 by using the latest version of RedSn0w 0.9.10b6.

Below are the steps on How to jailbreak 5.0.1 / 5.1 

Important Note: This jailbreak is not for iPhone 4S jailbreak, iPad 2 or iPad 3 jailbreak if these are running ios 5.1 otherwise if they are running ios 5.0.1 then it is OK. 

Step 1: Download latest version of RedSn0w 0.9.10b6 by Clicking Here for Windows and Here for Mac.

Step 2: Extract the zip file and run the RedSn0w.exe file to start the redsn0w jailbreak process.

Step 3: There are two buttons “Extras” and “Jailbreak”, click Jailbreak to jailbreak and install Cydia


Step 4: Follow the instructions given on Next screen and put your device in DFU mode. Press Next.

Step 5: Follow the screen instructions to put your device in DFU mode. RedSn0w will detect iPhone 4 and start installation of jailbreak and select “Install Cydia” when asked. (If not you can follow steps to put your device in DFU mode as instructed by clicking Next in previous step again). Close RedSn0w.

Step 6: Boot Tethered your iPhone 4: Restart RedSn0w by double clicking the exe file.

Go to Extra option and click “Just Boot”

Your iphone 4 will restart and now it is jailbroken tethered.

Note: This is a tethered jailbreak and if you need to reboot your iPhone you need to do step 6 each time therefore you need computer to reboot your iPhone4.

Subscribe to my blog so that I can update you whenever the untethered jailbreak for iPhone 4 is available.

Posted in How to, ios 5.1.0, iPad 2, iPhone4S, Jailbreak, Jailbreak Downloads Tagged with: , , , , , , , , , , , , , , , , , , , ,